Pigeon | Narrow Neck Flexible PPSU Bottle | 160mL | Hong Kong Official Product

The unique internal groove design of the nipple allows for maximum elasticity and supports the baby's natural tongue movement.

The ideal nipple shape perfectly fits the baby's sucking fossa.

The super-elastic silicone is made of extra soft and thick silicone, providing perfect softness and elasticity for easier and more comfortable sucking for the baby.
The bottle is made of PPSU polymer material, which is durable and can withstand high-temperature sterilization processes. PPSU is widely used in the manufacturing of medical and food contact products.

• Before first use, be sure to wash thoroughly and immerse in boiling water for about 5 minutes to ensure hygiene.
• Before each washing, sterilizing, and feeding, please wash your hands with soap.
• After each use, rinse immediately with warm water, then wash with a special bottle cleaning solution.
• Please use a sponge brush to wash plastic bottles.
• To protect the air vent of the nipple and the Y-cut nipple opening, the surface is coated with a safe white powdered food additive. Please wash before first use.
• Gently rub the air vent, air hole, and nipple opening with both hands. Strong scrubbing or pulling may cause the air vent to crack, leading to leakage.
• The nipple tip is very delicate. Please wash carefully when cleaning with a nipple brush.

 

Be sure to sterilize before each use. Sterilization methods are as follows:
1. Boiling sterilization

• After thoroughly washing all parts of the bottle (bottle body, nipple, bottle cap, and nipple cover), completely immerse them in water and boil for about 5 minutes after boiling. During sterilization, the product may touch the edge of the pot and deform.
• During sterilization, if the product is about to touch the pot, use Pigeon bottle tongs to move it away.
• Boiling for too long will reduce the product's lifespan.
• Please be sure to pay attention throughout the process.

2. Chemical sterilization

• The most convenient and safe way to sterilize bottles and nipples.
• For chemical sterilization, please use a sterilizing solution specifically for bottles and nipples. For details, please follow the operating instructions of the sterilizing solution.
• Using Pigeon bottle sterilizing solution, continuous immersion for one hour will achieve sterilization and disinfection.

3. Microwave sterilization

• Please follow the operating instructions of the sterilizing appliance for sterilization.
• Please use according to the operating instructions of your microwave oven.
• Be sure to use specialized appliances. Bottles and parts should not be placed directly into the microwave for sterilization. There must be water in the container when heating.

4. Steam sterilizer

• Steam sterilizers can quickly and easily sterilize. All cleaned bottles and accessories can be sterilized using the Pigeon steam sterilizer. Please follow the instructions for use of the sterilizing product.

5. Other methods

• This product is not recommended for UV or drying sterilization methods! (May cause faster product wear).

 

• Adult supervision is required when using this product.
• Do not use the nipple as a pacifier.
• Continuous and prolonged sucking of milk may cause tooth decay.
• Always check the temperature of the milk before feeding.
• Keep all items out of reach of children.
• Parents should pay special attention when the baby is teething. Check if the nipple is damaged by biting before each use, and pull it in all directions. Discard immediately if there are signs of damage or injury.
• Do not expose the nipple to direct sunlight, direct heat, or sterilize (with sterilizing solution) beyond the recommended time, as this will make the nipple brittle.
• Bottles are used for feeding milk or other liquids to babies. Do not use for other purposes.
• After use, please store this product in a cool, ventilated, and dry place or in a dry, covered container, out of reach of children.

 

1. When preparing formula, always use boiled water that has cooled to above 70℃. Do not use boiled water that has cooled below 70℃.
2. Follow the mixing instructions of each formula brand for the ratio of water to formula powder.
3. Gently screw the bottle cap with the fixed nipple onto the bottle. Do not put on the bottle cover. Hold the bottle and gently rotate and shake. After the formula powder is completely dissolved, pour in the remaining hot water.
4. After preparing the formula, put on the bottle cover and place the bottle under running tap water to cool it to a suitable feeding temperature. At this time, rinse the part below the bottle cap with running tap water, being careful not to rinse the nipple and bottle cap.
5. First, confirm that the milk is at a suitable feeding temperature.
   When using a round hole nipple (S, M, L): Tilting the bottle after preparing formula may spray liquid. Wait until the milk drips slowly before feeding the baby.
   When using a Y-cut nipple: Due to the tight nipple opening, tilting the bottle will not spray liquid. After cooling sufficiently, check the surface temperature of the bottle.
   • If the bottle is cold, pouring boiling water into it suddenly may cause it to crack. Please be extra careful.
   • When preparing formula, if the bottle is shaken vigorously up and down, boiling liquid may overflow and cause burns. Please hold the bottle carefully.
   • Do not shake the bottle with the bottle cover on. If the bottle cover is on, high temperatures can cause pressure inside the bottle to rise, leading to overflow or spraying of boiling liquid.
   • Do not use a microwave oven to heat hot water for formula in the bottle, or to heat prepared formula.
   • Avoid preparing formula near the baby, as it is easy to scald the baby.
   • Check the bottle before and after each use. Replace immediately if any cracks or other damage are found.