Pigeon｜POCHItto 3-in-1 Steam Sterilizer & Dryer

Pigeon's new POCHItto 3-in-1 Electric Steam Sterilizer and Dryer automatically sterilizes and dries with one touch, and can store daily baby essentials. Simply add water, no sterilizing solution needed. It can hold up to 5 Pigeon SofTouch™ Peristaltic PLUS bottles simultaneously.

• Fully automatic operation, one touch completes sterilization and drying. No need to change sterilizing solution daily, repeatedly use a microwave, or air-dry items on a drying rack. Saves time and effort.

• High-temperature steam powerfully and evenly sterilizes. Suitable for baby bottles and other baby products, with a sterilization rate of up to 99.9%*, for greater peace of mind.

*Based on test results for sterilizing effect on four types of bacteria in baby bottles (in compliance with ISO standards)

• Simply add 80ml of water for sterilization. Easy to use and economical.

• Adjustable sterilization and drying modes. Sterilization can be completed in as fast as approximately 10 minutes. Large capacity design can sterilize up to 5 240ml SofTouch™ Peristaltic PLUS bottles simultaneously, completing multi-bottle sterilization and drying in one go, which is convenient and quick.

• Wide range of uses. Besides baby bottles, POCHItto is also suitable for sterilizing and drying sippy cups, pacifiers, and even some non-baby items like tableware (limited to items with heat resistance of 100°C or above and boilable).

• After drying, items can be directly stored, saving space and eliminating the need for a separate drying rack. This effectively saves space and is more hygienic.

• Equipped with dry-burning protection. If no steam water is added, a "beep" sound will remind you when you press the button, ensuring safe use even during busy parenting times and preventing accidents.

【How to Use】

Step 1: Remove the bottle compartment from the base. Add 80mL of tap water or distilled water to the heating plate on the support, then place the bottle compartment back onto the base (ensure the bottle compartment and the base are aligned before placing).

Step 2: Place bottles upside down in the bottle compartment, and place nipples and other accessories on the accessory rack. Close the lid.

Step 3: Connect the power plug to the socket. Press the power button. The LED backlight of the display will light up. Select the corresponding button as needed to start the function.

Step 4: After the program is completed, the machine will beep 5 times to remind you, then automatically power off. After the sterilizer cools down, remove the sterilized and dried items and unplug the power cord.

【Time Required for Each Mode】

Sterilization | Approx. 10 minutes

Drying | 45 minutes

Fast Drying | 10 minutes

Sterilization and Drying | Approx. 55 minutes (Sterilization | Approx. 10 minutes + Drying | 45 minutes)

【Components | Material and Heat Resistance】

Lid, Bottle Compartment, Rack | Polypropylene (PP) 120°C

Sealing Ring | Silicone Rubber 120°C

Heating Plate | Stainless Steel

【Weight】Approx. 2.9kg

【Dimensions】W230mm×D256mm×H344mm

【Voltage】220-240V~ 50-60Hz

【Rated Input Power】550W

【Recommended Water Volume】80ml

【Origin】China

【Caution】

・Place the product on a horizontal surface during use.

・Do not immerse the base, power cord, or power plug in water or any other liquid.

・Never disassemble the base yourself to avoid electric shock.

・If the power cord is damaged, stop using it and it must be replaced by the manufacturer or service personnel.

・Do not use accessories or parts manufactured by other companies. If you replace them yourself, the sterilizer's warranty will be void.

・Do not place the sterilizer in high temperatures or direct sunlight.

・For better drying results, it is recommended to place bottles and accessories as shown in the instruction manual. Do not hang bottles on the rack, as this may deform the rack and affect drying performance.

・Steam may escape from the sterilizer and dryer, and items just sterilized are still very hot. Be careful to avoid burns.

・Before handling items, ensure your hands are thoroughly clean to avoid secondary contamination.

・During operation, if you wish to stop, you can press the power button to cease operation.

・After one sterilization and drying cycle is completed, let it stand for about 10 minutes; wait for it to cool down completely before adding water for the next sterilization and drying.

・To prevent machine malfunction due to excessive water, a drain hole has been added to the machine base. During sterilization, steam may leak from the drain hole, which is normal. Please use with confidence.

・Move or store the sterilizer only when it has completely cooled down.

・After the sterilizer has been used and completely cooled down, pour out any remaining water.

・When disposing of the sterilizer, please hand it over to a designated recycling center.

・When individuals who are unable to operate this product independently or persons with limited or no capacity for civil conduct (including children) use it, an adult responsible for their safety must supervise or guide them.

・Unplug the power cord immediately after use.

【Warning】

・During use and cleaning of the sterilizer, place it out of reach of infants and children.

・Before sterilization, it is recommended to add 80mL of tap water or distilled water.

・Do not add bleach or other chemical substances.

・During use, do not unplug the power cord, move, or open the sterilizer.

・During sterilization, the sterilizer's temperature is extremely high. Do not touch it carelessly and be aware of the steam outlet on the lid to avoid steam burns.

・If the product is damaged or deformed, do not continue to use it.

【Care and Maintenance】

・After use, unplug the power cord and allow the sterilizer to cool naturally.

・Pour out any remaining water from the sterilizer base, wipe it clean, and let it dry in a well-ventilated area.

・Using distilled water for sterilization helps reduce limescale buildup.

・Regularly clean the limescale on the sterilizer base, preferably once a month, to maintain the sterilizer's efficient operation.

・Descaling method: Pour 20mL of white vinegar and 40mL of tap water or distilled water into the sterilizer. Press the power button, then press the "Sterilize" button. When the white vinegar and water mixture heats up, press the power button to stop. Let it sit for 30 minutes. After the limescale dissolves, pour out the remaining water from the sterilizer base, rinse, and wipe dry with a clean cloth.

・This product requires professional maintenance. If quality issues are found, do not attempt to disassemble and repair the sterilizer yourself.

・It is recommended to regularly clean dust from the high-efficiency filter cotton once a month to improve filtration effectiveness. (Refer to the English version of the instruction manual for replacement instructions.)

・The service life of this product's high-efficiency filter cotton is approximately 500 hours. After cumulative use reaches 500 hours, the machine will automatically emit an alarm. This alarm will not affect normal operation, but it is recommended to replace with a new filter cotton immediately.